The workspace for security installers

Security quotations,
made simple

Bring your site notes, equipment and pricing into a complete security quotation, then use the same information to prepare the paperwork and plan the work with your team.

30 days free, with no card required

Access controlCCTVIntruder
workspace / security upgrade
Quotes / Security upgradeJD
Northbank Exchange

Security upgrade

Draft quotation
Customer & siteInstallationReview

Northbank Exchange

Three floors · commercial workspace

Survey record
CustomerNorthbank Property
BuildingNorthbank Exchange
ContactMia Roberts · Facilities
Surveyed byAlex Morgan
New installationExtend existingUpgrade / takeoverSmall worksMaintenanceService call
AMAccess across three floorsSite requirements

10 controlled doors, reader entry and RTE exit. HID Signo 20 readers on Genetec Synergis. Reception stays operational during the works.

10 readers · 3 floor areas · phased installation
NBX-A-101 · floor plans, revision CSurvey notes, existing services and site accessPDF
Genetec Synergis10 doors · 10 readers · OSDP
Openings by floor
Ground floorReception, lobby & staff access4
First floorOffice and meeting areas4
Second floorManagement and plant corridor2
Control architecture5 × Mercury MP1502Two doors per controller · one reader per door
Selected equipmentBuild a door, reuse its setup, refine each opening.
HID Signo 20 readersReader entry + RTE exit10✓
Locking & exit equipmentMaglocks, break glass, RTE & Askari10 sets✓
Power & controlCloudlink · PSUs · standby batteriesSelected✓
Licences, cable & sundriesReader connections, fixings & labelsIncluded✓
Every item belongs to the job. Shared equipment is counted once.

Review the detail behind your price

Deterministic review
✓
Readers and controller capacity10 readers · 5 two-reader controllers · 10 doors
✓
Door equipment and licencesLocks, break glass, RTE, Askari sounders and 10 reader connections
✓
Power, cable and installation5 PSU / battery sets · 1,000 m cable allowance · 80 h
2 design points for review

Confirm supply loads and standby. Agree fire interface responsibility and cable routes before issue.

From the installationQty

HID Signo 20 readers10

Mercury MP15025

Genetec Cloudlink1

Power / standby sets5

Door hardware sets10

Installation allowance80 h

Reader-in / RTE-out · example quantities
Hartwell
Security
Quotation Q-1042
Revision 02

Access control installation

Northbank Property · Northbank Exchange

Supply, install and commission a Genetec Synergis access control system serving 10 controlled doors with 10 HID Signo 20 readers.
Equipment & infrastructureControl, door hardware, power, licences and cable£12,515.00
Installation & commissioning80 hours at £75.00£6,000.00
Total excluding VAT£18,515.00
Includes testing, configuration and operator handover. Builder’s works and new mains supplies by others.

See your quotation develop
as you build the system

Add or remove equipment and see the quantities, scope and draft total update together.

10 doors · illustrative live draft
Build the actual installationExample job
9:41▰
ParoWorksAM
Site survey / 01

Capture what
the site needs

CustomerNorthbank PropertyBuilding nameNorthbank Exchange
New installationAccess control · three floors
What does the customer need?

10 doors. Reader in, RTE out.
Genetec with HID Signo 20.
Keep reception open.

Save requirements
Floor plans · revision C
Add another system

Illustrative interface and example prices

A closer look

From site detail to a quotation you can review

See how a mixed security job can come together, with your decisions and review at every step.

28 seconds · Fictional example · No sound

Read the video description

A fictional access control, CCTV and intruder job is prepared. A selected document proposes two readers and six hours for review. The estimator checks the indicative items and prices before preparing a customer quotation.

Quick Quote

A small job can start with a sentence.

Describe the customer, site and parts. Review the draft against your catalogue, check the quantities and save it as a normal quotation. Start with a free trial or sign in to your workspace.

Start a Quick Quote

Quoting with a deterministic engine

See what changes when
you add one more door

A reader is only part of the job. ParoWorks connects your choices to the control equipment, power, licences and labour around them. Try the example and see the installation and price respond together.

Try an example
Your installation

See how each door contributes to the complete system

Reader entry and RTE exit. Choose the hardware and keep shared control equipment in view.

10
Your illustrative draft total£18,515.00
Rates, options & technical checks
Example configurationGenetec Synergis · HID Signo 20Selected
Your example labour rate£75.00 / hour

Rules → quantities → pricing
Reader demand, control capacity and support equipment10 doors → 10 readers → 5 controllers
Equipment & allowancesQtyAmount
Example total excluding VAT£18,515.00
Illustrative prices · change the quantity to see the system respond.
You stay in control of the design

Technical checks use the selected products and entered facts. They do not replace site verification or the installer’s design approval.

Explore the platform

Follow the detail into the document

A quotation you can
put your name to

The price matters. So does being clear about what you are supplying, how the work will be carried out and what the customer needs to provide.

Open the complete Northbank example to see the scope, equipment, labour and responsibilities in one considered document.

Read the complete quotation Worked example using illustrative products and prices, shaped by the structure of an installer-supplied quotation.
Hartwell
Security
Q-1042 · Rev 02
Northbank Exchange
01 / Scope of works

Access control installation

Supply, install and commission a Genetec Synergis system serving ten controlled doors, with HID Signo 20 reader entry and request-to-exit.

10 doors, each withReader · maglock · RTE · break glass
Door contact · Askari sounder
Equipment & infrastructure£12,515.00
Installation & commissioning£6,000.00
Total excluding VAT£18,515.00
Responsibilities are part of the scope

Customer-provided platform, network and mains supplies. Release strategy and standby requirements to be confirmed.

View scope, schedules & commercial detail

A useful head start on everything that follows

Keep the detail
with the job

Use the same information to plan visits, prepare the parts and keep a useful record for the next person.

From agreed work to the working day

Send your team to site prepared

Assign the visit with its scope, access arrangements and drawings attached. Time, progress and evidence come back to the same job.

Team schedule2–6 NovemberWeek view
Mon2
Tue3
Wed4
Thu5
Fri6
08:0010:0012:0014:00
08:30–11:00CCTV installationAlder HouseJR
10:00–13:00Intruder upgradeVale StudiosSK
Available
Available
14:00–15:30Service visit
Available
Try placing the example visit in the diary.
AMAlex MorganAccess installation · site briefing

Before arrival Book in with Mia Roberts. Keep the reception entrance operational. Review plan NBX-A-101 revision C.

Take to site Agreed scope, door schedule, installation drawings and commissioning checklist.

Explore the job dashboard

Getting started with ParoWorks

Start with a job you know

Bring your products and prices. Import them yourself, or ask about assisted catalogue setup when support is available.

  1. Bring your usual products

    Bring your catalogue and labour rates. Review the import yourself, or ask about assisted setup when support is available.

  2. Build a familiar job

    Choose a familiar site and system, then add the equipment and allowances you would normally quote.

  3. Make it ready to share

    Review the scope and price as your customer will, then explore the paperwork that follows.

See what getting started involves 30 days to try it with your own work · no card required

Plans that grow with your business

Make room for your
next good quotation

Start with a familiar job and your own rates. You have 30 days to see how ParoWorks fits your business, with no card required.

Annual billing gives you a year for the price of ten months

For independent installers and estimators

Solo

£49 / month

One workspace for your quotations, your catalogue and the documents that follow.

Try Solo free
  • One user with unlimited active quotes
  • Your own price book, branding and rates
  • Quotation PDFs, specifications and commissioning checklists
  • Supplier purchase orders to draft and copy
  • 750 assistant credits each month
For businesses that share quoting and delivery

Team

£119 / month

Bring three people into the same workspace, with more seats available as your team grows.

Try Team free
  • Everything in Solo, with three seats included
  • Supplier purchase order drafts and email sending
  • Full analytics for your workspace
  • 3,750 pooled assistant credits each month
  • £29 per extra seat / month. Each adds 750 monthly credits.

Bring your catalogue with you

Getting started is easier with the products and prices you already use. Import your lists yourself, or ask about assisted setup during onboarding when support is available.

Compare plans and read the details

Getting to know ParoWorks

A little more
before you get started

Can I use my own catalogue and labour rates?

Yes, you can import your existing catalogue or supplier lists, and use your own product prices, rates and allowances. You can ask about assisted setup during onboarding when support is available. ParoWorks’s calculations follow the selected parts and entered quantities, with unresolved information called out for review.

Can I combine access, CCTV and intruder in a quote?

Yes, you can include all three disciplines in a mixed job, sharing customer and site information while retaining their own installation decisions and one coherent quotation.

Does the engine make technical decisions for me?

The engine applies defined rules and technical calculations to the configuration you supply. It highlights capacity and missing information. The installer chooses the system and products and remains responsible for site verification, technical suitability and approval.

What happens when a quote is accepted?

The agreed version stays on record. Continue into jobs and visits, supplier purchasing, handover and invoicing, with customer and site information still connected.

Is ParoWorks only for new installations?

You can also use ParoWorks for extensions, upgrades and takeovers, small works, maintenance and service calls. Existing equipment and historical records stay part of the site’s context.

Bring the next job
you need to quote

Your usual products, your own rates and a job you understand. That is the best way to see what ParoWorks can do for you.